features regulated converters ? class b emc filter built-in ? reverse polarity protected ? inrush current limiting (soft start) ? output trim potentiometer ? output led indicator ? din rail mounting or panel mount options pd-1 rev.: 0/2016 www.recom-power.com dc/dc converter power module 3 y e a r w a r r a n t y 3 description the recom power module takes a standard 15w-60w converter and mounts it on a pcb with screw ter - minals, an emc flter, input protection circuitry and a built-in heatsink to offer a complete power module that can be mounted on a bulkhead or on a standard din rail. the power module is primarily designed for transport applications such as a gps vehicle tracking power supply or a radio communications power supply, but will also fnd many uses in industrial, communications or battery-powered applications. 15-60 watt single, dual & triple outputs power modules selection guide single and dual outputs - panel mount version power module input output internal converter part number range power fuse series (bulkhead version) (vdc) (w) (replaceable) rpm15-24xxs_dfw (1,2) 9.5-36 15 t6a rp15-24xxs_dfw rpm15-48xxs_dfw (1,2) 18-75 15 t4a rp15-48xxs_dfw rpm20-24xxs_dfw (1,3) 9.5-36 20 t6a rp20-24xxs_dfw RPM20-48XXS_dfw (1,3) 18-75 20 t4a rp20-48xxs_dfw rpm30-12xxs_de (3) 9.5-18 30 t6a rp30-12xxs_de rpm30-24xxs_de (3) 18-36 30 t6a rp30-24xxs_de rpm30-24xxs_dew (1,3) 10-40 30 t6a rp30-24xxs_dew rpm30-48xxs_de (3) 36-75 30 t4a rp30-48xxs_de rpm30-48xxs_dew (1,3) 18-75 30 t4a rp30-48xxs_dew rpm40-12xxs_dg (3) 9.5-18 40 t8a rp40-12xxs_dg rpm40-24xxs_dg (3) 18-36 40 t8a rp40-24xxs_dg rpm40-24xxs_dgw (1,3) 9.5-36 40 t8a rp40-24xxs_dgw rpm40-48xxs_dg (3) 36-75 40 t4a rp40-48xxs_dg rpm40-48xxs_dgw (1,3) 18-75 40 t4a rp40-48xxs_dgw rpm60-24xxsg (1,3) 18-36 60 t8a rp60-24xxsg rpm60-48xxsg (1,3) 36-75 60 t4a rp60-48xxsg iec60950-1 certifed en60950-1 certifed how to use this datasheet: 1. select the converter that suits your application from the converter series list below 2. decide on din mount (rpmd) or bulkhead (rpm) version ordering example: 40w, 18-75 vdc in, single 12v out, din mount = rpmd40-4812sgw xx = output voltage options single outputs: 3.3s = 3.3v 05s = 5v 12s = 12v 15s = 15v dual outputs: 12d = 12v 15d = 15v refer to converter series datasheets for detailed information. notes: note1: add ?/n for nega tive ctrl logic note2: add ?/p for positive ctrl log ic note3: no suffx for positive ctrl log ic
pd-2 rev.: 0/2016 www.recom-power.com dc/dc converter power module series selection guide triple outputs - panel mount version power module input output internal converter part number range power fuse series (bulkhead version) (vdc) (w) (replaceable) rpm40-120512tg (3) 9.5-18 40 t8a rp40-120512tg rpm40-120515tg (3) 9.5-18 40 t8a rp40-120515tg rpm40-240512tg (3) 18-36 40 t8a rp40-240512tg rpm40-240515tg (3) 18-36 40 t8a rp40-240515tg rpm40-480512tg (3) 36-75 40 t4a rp40-480512tg rpm40-480515tg (3) 36-75 40 t4a rp40-480515tg selection guide triple outputs - din rail version power module input output internal converter part number range power fuse series (bulkhead version) (vdc) (w) (replaceable) rpmd40-120512tg (3) 9.5-18 40 t8a rp40-120512tg rpmd40-120515tg (3) 9.5-18 40 t8a rp40-120515tg rpmd40-240512tg (3) 18-36 40 t8a rp40-240512tg rpmd40-240515tg (3) 18-36 40 t8a rp40-240515tg rpmd40-480512tg (3) 36-75 40 t4a rp40-480512tg rpmd40-480515tg (3) 36-75 40 t4a rp40-480515tg notes: note3: no suffx for positive ctrl log ic notes: note3: no suffx for positive ctrl log ic selection guide single and dual outputs - din rail version power module input output internal converter part number range power fuse series (din rail version) (vdc) (w) (replaceable) rpmd15-24xxs_dfw (1,2) 9.5-36 15 t6a rp15-24xxs_dfw rpmd15-48xxs_dfw (1,2) 18-75 15 t4a rp15-48xxs_dfw rpmd20-24xxs_dfw (1,3) 9.5-36 20 t6a rp20-24xxs_dfw rpmd20-48xxs_dfw (1,3) 18-75 20 t4a rp20-48xxs_dfw rpmd30-12xxs_de (3) 9.5-18 30 t6a rp30-12xxs_de rpmd30-24xxs_de (3) 18-36 30 t6a rp30-24xxs_de rpmd30-48xxs_de (3) 36-75 30 t4a rp30-48xxs_de rpmd30-24xxs_dew (1,3) 10-40 30 t6a rp30-24xxs_dew rpmd30-48xxs_dew (1,3) 18-75 30 t4a rp30-48xxs_dew rpmd40-12xxs_dg (3) 9.5-18 40 t8a rp40-12xxs_dg rpmd40-24xxs_dg (3) 18-36 40 t8a rp40-24xxs_dg rpmd40-24xxs_dgw (1,3) 9.5-36 40 t8a rp40-24xxs_dgw rpmd40-48xxs_dg (3) 36-75 40 t4a rp40-48xxs_dg rpmd40-48xxs_dgw (1,3) 18-75 40 t4a rp40-48xxs_dgw rpmd60-24xxsg (1,3) 18-36 60 t8a rp60-24xxsg rpmd60-48xxsg (1,3) 36-75 60 t4a rp60-48xxsg notes: note1: add ?/n for nega tive ctrl logic note2: add ?/p for positive ctrl log ic note3: no suffx for positive ctrl log ic
dc/dc converter power module series pd-3 rev.: 0/2016 www.recom-power.com specifcations measured at ta = 25c, nominal input voltage, full load otherwise noted basic characteristics parameter condition min. typ. max. inrush current nominal vin and full load soft start start-up time power up ctrl pin 100ms 20ms bulkhead version environmental parameter condition value thermal impedance 8.5c/watt safety and certifications iec general safety en general safety lvd20110124 iec60950-1, 2nd edition, 2005 + a1:2009 en60950-1:2006 + a11:2009 +a1:2010; emc compliance condition standard / criterion emi standard en55022, class b esd radiated immunity fast transient surge conducted immunity en61000-4-2, criteria a en61000-4-3, criteria a en61000-4-4, criteria a en61000-4-5, criteria a en61000-4-6, criteria a dimensions and physical characteristics parameter type value material chassis aluminium package dimensions (lxwxh) 101.6 x 57.15 x 19.0mm package weight 134g connectors screw terminal specifcatins are as in individual converter datasheets with the following exceptions: panel mount version (mm) 19.0 101.6 57.15 mounting centres 92.1 cmc fuse tvs fet trim led heat-sink plate 17.2 3.5 6.35 pin connections pin # single dual 1 +vin +vin 2 -vin -vin 3 ctrl ctrl 4 nc nc 5 -vout -vout 6 +vout com 7 nc +vout nc: no connection tolerance: x.x 0.25mm
pd-4 rev.: 0/2016 www.recom-power.com dc/dc converter power module series specifcatins are as in individual converter datasheets with the following exceptions: selection guide typical at nominal input and 25c unless otherwise noted basic characteristics parameter condition min. typ. max. inrush current nominal vin and full load 15a start-up time power up ctrl pin 100ms 20ms environmental parameter condition value thermal impedance 4.2c/watt safety and certifications iec general safety en general safety lvd20110124 iec60950-1, 2nd edition, 2005 + a1:2009 en60950-1:2006 + a11:2009 +a1:2010; emc compliance condition standard / criterion emi standard en55022, class b esd radiated immunity fast transient surge conducted immunity en61000-4-2, criteria a en61000-4-3, criteria a en61000-4-4, criteria a en61000-4-5, criteria a en61000-4-6, criteria a dimensions and physical characteristics parameter type value material chassis aluminium package dimensions (lxwxh) 125.0 x 57.6 x 24.5mm package weight 182g connectors screw terminal continued on next page din-rail version packaging information parameter type value packaging dimensions cardboard box 146 x 75 x 29mm packaging quantity 1pc
dc/dc converter power module series pd-5 rev.: 0/2016 www.recom-power.com specifcations measured at ta = 25c, nominal input voltage, full load otherwise noted 125.0 led 1 2 3 4 5 6 7 8 trim 116.3 57.6 24.5 din rail version (mm) pin connections pin # single dual triple 1 ctrl ctrl ctrl 2 -vin -vin -vin 3 -vin -vin -vin 4 +vin +vin +vin 5 nc nc +aux 6 -vout -vout com 7 +vout com -aux 8 nc +vout +vout nc: no connection tolerance: x.x 0.5mm packaging information parameter type value packaging dimensions cardboard box 146 x 75 x 29mm packaging quantity 1pc the product information and specifcations are subject to change without prior notice. recom products are not authorized for use in safety-critical applications (such as life support) without recoms explicit written consent. a safety-critical application is defned as an application where a failure of a recom product may reasonably be expected to endanger or cause loss of life, infict bodily harm or damage property. the buyer shall indemnify and hold harmless recom, its affliated companies and its representatives against any damage claims in connection with the unauthorized use of recom products in such safety-critical applications.
|
